Bathroom-only remodelers in Middle Tennessee occupy a different lane than full kitchen-and-bath design houses. The three firms profiled below lead with bath specialty: tub-to-shower conversions, accessible bathing, walk-in tubs, and one-day to multi-day bath installations rather than whole-home renovation. Each entry reflects information published on the company’s own site, verified on 2026-05-11.
Quick Comparison #
| Firm | Operating Since | Local Location | Primary Focus |
|---|---|---|---|
| Re-Bath Nashville | Brand established 1979 | Antioch, TN | Full bath remodels, accessible bathing, tub and shower updates |
| Bath Fitter Nashville | Brand established 1984 | Madison, TN | Acrylic tub liners, shower replacements, tub-to-shower conversions |
| Five Star Bath Solutions of Nashville | Brand established 1996 | Nashville, TN (Bellevue) | Bath and shower remodels, accessibility solutions, walk-in installations |
1. Re-Bath Nashville #
- Address: 5144 Hickory Hollow Parkway, Antioch, TN 37013
- Phone: (615) 647-5703
- Brand origin: Re-Bath was founded in 1979 by Kurt Kittleson; the Phoenix-based parent now franchises across the United States
- Local presence: Re-Bath Nashville is published as locally owned and operated, serving Davidson County and surrounding Middle Tennessee markets
- Credentials and practice: Full bathroom remodeling brand carrying a manufacturer warranty on most products and services with one-time transfer; published focus on accessible bathing per Americans with Disabilities Act guidance
- Service area: Nashville, Antioch, Brentwood, Franklin, Hendersonville, Mt. Juliet, and the broader Middle Tennessee corridor per the location page
- Specialties: Complete bathroom remodels, tub-to-shower conversions, shower-to-tub conversions, accessible bathrooms with walk-in tubs and grab-bar layouts, vanity replacement, flooring, lighting
- Website: Re-Bath Nashville
Full-room bath remodeling rather than insert-only work #
The Re-Bath model spans the full bathroom rather than a single fixture. Published scope includes tubs, showers, vanities, sinks, flooring, and lighting under one contract. Homeowners who want a coordinated bath redesign without engaging a general contractor for adjacent trades can route the entire room through this practice.
Accessible bath designs aligned with ADA guidance #
The location publishes accessible-bath services that include walk-in tubs with door seals, low-threshold showers, and grab-bar placements. Americans with Disabilities Act guidance for residential bath accessibility addresses 36-inch grab-bar lengths, reinforced wall blocking, and 60-inch turning radii where wheelchair access is in scope. Re-Bath’s accessible category targets these layout needs for aging-in-place homeowners.
Manufacturer warranty with one-time transfer #
Re-Bath publishes a manufacturer warranty across most products and services with a one-time transfer option to a subsequent owner. The transfer provision is relevant for homeowners considering a future sale, since it lets the warranty follow the bathroom rather than the original buyer alone.
Multi-day installation window #
The Re-Bath process is published as a multi-day install rather than a same-day overlay. The practice covers demolition, rough-in coordination, and finish installation within a defined schedule, which suits homeowners pursuing a fuller bath change than a liner-only product line provides.
https://www.rebath.com/location/nashville/
2. Bath Fitter Nashville #
- Address: 668 Myatt Drive, Madison, TN 37115
- Phone: (615) 208-2389
- Brand origin: Bath Fitter was founded in 1984 in Montreal by brothers Brian, Wayne, and Glenn Cotton; one of two North American manufacturing plants operates in Tennessee
- Local presence: Bath Fitter Nashville (Madison) serves a ten-county footprint across Tennessee and Kentucky per the location page
- Credentials and practice: One-piece acrylic tub and wall installation with lifetime warranty on the Bath Fitter product
- Service area: Nashville, Madison, Goodlettsville, Hendersonville, Gallatin, Springfield, and the surrounding Tennessee and southern Kentucky counties
- Specialties: Bathtub replacement over existing tubs, one-piece acrylic wall systems, tub-to-shower conversions, walk-in showers, wainscoting and accessory packages
- Website: Bath Fitter Nashville
One-day installation built on proprietary acrylic #
Bath Fitter manufactures custom-molded acrylic tubs, shower bases, and wall surrounds at its Tennessee and Quebec plants. The PermaFit installation places the new acrylic shell over the existing tub or shower, which compresses the project to a single installation day in most cases. That timeline appeals to single-bathroom households that cannot lose the room for a week-long demolition.
Lifetime warranty on the manufactured product #
The brand publishes a lifetime warranty on the Bath Fitter product itself for as long as the original purchaser owns the home. That warranty pairs with the proprietary acrylic and the in-house installer model rather than a sub-contracted finishing trade.
Tub-to-shower conversion as a named line #
Tub-to-shower conversion appears as a dedicated service line, addressing households moving away from a step-over tub for accessibility or simply for daily-use preference. The conversion uses the existing footprint with new acrylic wall panels and a low-threshold shower base.
Manufacturing footprint inside Tennessee #
The Tennessee plant supplies the regional install network. Local manufacturing shortens the lead time between measurement and installation compared with shipping a custom shell from a single national plant, which the Madison location notes for Middle Tennessee homeowners.
https://www.bathfitter.com/us-en/location/nashvillenorth/
3. Five Star Bath Solutions of Nashville #
- Address: 7457 Riverland Drive, Nashville, TN 37221
- Phone: (615) 979-8823
- Owner: Jared Bashirian (Nashville franchisee)
- Brand origin: Five Star Bath Solutions was established in 1996; the parent network operates from Spanish Fork, Utah and lists more than seventy franchise locations
- Credentials and practice: Full lifetime, transferable warranty on products, labor, and materials per the location page; staff described as certified and licensed installation technicians
- Service area: Nashville, Bellevue, Brentwood, Franklin, Antioch, Mt. Juliet, and surrounding Middle Tennessee neighborhoods
- Specialties: Bathroom remodeling, tub-to-shower conversions, shower-to-tub conversions, walk-in shower and bathtub installation, bath-and-shower combinations, safety and accessibility upgrades including grab bars and non-slip flooring
- Website: Five Star Bath Solutions of Nashville
Locally owned franchise with named principal #
The Nashville location lists Jared Bashirian as the franchisee with twenty-one-plus years of personal bathroom remodeling experience. A named local owner gives the homeowner a single point of accountability rather than a corporate call center, which is meaningful on warranty service calls after install.
Lifetime transferable warranty across product, labor, and materials #
The published warranty extends across product, labor, and materials and transfers to a future owner of the home. Locally serviced warranty matters because acrylic and surround warranties tied to a national parts depot can stall on site visits; the location publishes local service for warranty events.
Accessibility line with grab bars, benches, and non-slip flooring #
The location publishes a safety and accessibility category that pairs walk-in tubs and low-threshold showers with grab bars, fold-down benches, and non-slip floor surfaces. Aging-in-place specifications commonly call for grab-bar reinforcement at the tub, shower, and water closet, and the published line covers those positions.
Riverland Drive base near Bellevue #
The Riverland Drive office sits in the Bellevue area of Nashville, giving the practice quick reach to west Davidson County, Bellevue, Belle Meade, and the Franklin corridor. That base location is geographically distinct from the Antioch and Madison locations of the other two profiled firms, which spreads bath-only coverage across the city’s three quadrants.
Reference Notes #
The Tennessee Board for Licensing Contractors administers the state Building Contractor (BC) license required for construction projects valued at twenty-five thousand dollars or more, including residential, commercial, and industrial scopes. Inside that umbrella, the Residential Remodeler classification covers home-improvement work, and bathroom remodels involving plumbing or structural changes typically trigger the BC threshold once material plus labor crosses the dollar limit. For lower-value home-improvement work, Tennessee maintains a Home Improvement (HI) license category in covered counties including Davidson County, which applies to remodeling between three thousand dollars and twenty-five thousand dollars. License lookup is available through the Tennessee Department of Commerce and Insurance contractor license search portal.
Inside Nashville, the Metropolitan Government Codes Department reviews plumbing, mechanical, and electrical permits for any bath remodel that relocates fixtures, alters supply or drain lines, or modifies the structural envelope. Like-for-like fixture swaps without line relocation may fall under simpler permit pathways, while wet-wall changes, drain relocations, and shower-pan rebuilds require a plumbing permit pulled in the licensed contractor’s name. The Metropolitan Water Services backflow rules also apply to walk-in tubs with pressure-assisted features.
Industry credentials that appear on bathroom-focused practices include the National Kitchen and Bath Association (NKBA) Certified Bathroom Designer (CBD) designation, awarded after coursework and a portfolio review by the NKBA. The National Association of the Remodeling Industry (NARI) Certified Remodeler (CR) and Certified Remodeler Specialist (CRS) credentials appear on bath remodelers with broader renovation scope. For aging-in-place work, the National Association of Home Builders awards the Certified Aging-in-Place Specialist (CAPS) designation after a three-course curriculum on universal-design layouts, ADA references, and business of aging in place. Americans with Disabilities Act accessibility standards address bathroom grab bars at lengths of twenty-four, thirty-six, and forty-two inches depending on position, with reinforced wall blocking required to carry concentrated loads.
Selection Methodology #
Each listed practice publishes a physical Middle Tennessee address, a working phone number in the (615) area code, and a named local principal, franchisee, or location. Each operation leads with bathroom specialty rather than whole-home renovation, which differentiates this list from a general remodeling directory. Credentials and warranty language cited above were taken from each company’s own public site, with brand-origin facts (Re-Bath 1979 by Kurt Kittleson, Bath Fitter 1984 by the Cotton brothers, Five Star Bath Solutions 1996) cross-checked against publicly available brand histories. Listings reflect only information published as of 2026-05-11. Exact state license numbers are not reproduced because the Tennessee Department of Commerce and Insurance license search portal is the authoritative source and license status can change between publication and reader review.
Frequently Asked Questions #
Does a Nashville bathroom remodel require a Metro plumbing permit? #
Yes, in most cases. Any bath remodel that relocates fixtures, alters supply or drain lines, or modifies a wet wall requires a plumbing permit issued by the Metropolitan Government of Nashville and Davidson County Codes Department. Like-for-like fixture replacement on existing supply and drain stubs may fall under simpler permit pathways, but the contractor is responsible for confirming the correct permit class with Metro Codes before work starts.
What is the difference between a Tennessee BC license and a Tennessee HI license for a bathroom remodel? #
The Building Contractor (BC) license is required for any construction project valued at twenty-five thousand dollars or more, including residential remodels. The Home Improvement (HI) license is a separate Tennessee credential applicable in covered counties such as Davidson County for home-improvement work valued between three thousand dollars and twenty-five thousand dollars. Bath projects under three thousand dollars typically do not require either license, though they still require permits where the work scope triggers a permit class.
What does the NKBA Certified Bathroom Designer (CBD) credential mean? #
The Certified Bathroom Designer (CBD) credential is issued by the National Kitchen and Bath Association after the designer completes association coursework, documents bathroom design experience, submits a portfolio of completed bath projects, and passes the association exam. It is a personal credential held by the designer rather than the practice and signals training specifically in bathroom layout, plumbing planning, ventilation, and accessibility.
What is the Certified Aging-in-Place Specialist (CAPS) designation? #
The Certified Aging-in-Place Specialist (CAPS) designation is awarded by the National Association of Home Builders after the candidate completes three required courses covering universal design, technical aspects of aging-in-place remodels, and the business side of serving older adults. It is held by the individual designer, contractor, or therapist rather than the company, and it indicates training in layouts that support residents who plan to stay in their home as mobility needs change.
Editorial Note #
This guide was published on 2026-05-11 and reflects research current as of that date. Verify licenses, phone numbers, and current business status before engaging any firm.